Synergy Reef Docs
  • Synergy Reef Docs
    • Who We Are
    • Why Synergy Reef Docs?
  • Installation Manuals
    • The Synergy Reef Shadow Overflow
      • V1, V2 & V3 Overview
      • What's Needed to Install The Shadow® V2 or V3 Overflow
      • Drilling Your Aquarium
        • Drilling Return Holes
      • Attaching the Overflow to the Tank
      • Exterior Rear Box
        • EXTERIOR REAR BOX: Gluing & Initial Planning
          • What Glue Type?
        • Interior Rear Box Plumbing
        • Rear Box Lid
      • Internal Front Box
      • Trouble Shooting Tips
        • Leaks / Gasket Issues
        • Salt Creep
        • Noise
      • Shadow® V1 Installation Manual
      • Basic Tuning Approach
    • SK Sump Installation
      • Overview
      • Installing Filter Socks Only
      • Installing the SK Plates onto the Clarisea SK5000:
      • Float Switch Bracket Installation (Gen1 & 2 Only)
      • Float Switch Bracket Installation (SK5000 Gen3 Only)
      • Installing the Clarisea SK5000 into the sump
      • Using 1 Clarisea By Itself and/or 1 Filter Sock (or No Socks)
      • Trouble Shooting
      • Things Needed for Setup
    • RM Sump Installation
      • Overview
      • RM34 Sump Setup
        • Filter Socks Only
        • Installing a RedSea ReefMat 500
          • Option 1
          • Option 2
          • Option 3
      • RM44 Sump Setup
        • Single (1) Drain into 1 ReefMat 1200
        • Dual (2) Drains into 1 ReefMat 1200
      • RM60 Sump Setup
        • Single (1) Drain into 1 ReefMat 1200
        • Dual (2) Drains into 1 ReefMat 1200
      • RM72 Sump Setup
        • Installing the RedSea ReefMat 1200 into the sump
          • Single (1) Drain into 1 ReefMat 1200
          • Dual (2) Drains into 1 ReefMat 1200
  • Warranty
    • Warranty
Powered by GitBook
On this page
  1. Installation Manuals

SK Sump Installation

Synergy Reef® SK Series Sump Installation Instructions – SK44, SK60, SK72 Sumps

PreviousBasic Tuning ApproachNextOverview

Last updated 3 years ago

SK44