Synergy Reef Docs
  • Synergy Reef Docs
    • Who We Are
    • Why Synergy Reef Docs?
  • Installation Manuals
    • The Synergy Reef Shadow Overflow
      • V1, V2 & V3 Overview
      • What's Needed to Install The Shadow® V2 or V3 Overflow
      • Drilling Your Aquarium
        • Drilling Return Holes
      • Attaching the Overflow to the Tank
      • Exterior Rear Box
        • EXTERIOR REAR BOX: Gluing & Initial Planning
          • What Glue Type?
        • Interior Rear Box Plumbing
        • Rear Box Lid
      • Internal Front Box
      • Trouble Shooting Tips
        • Leaks / Gasket Issues
        • Salt Creep
        • Noise
      • Shadow® V1 Installation Manual
      • Basic Tuning Approach
    • SK Sump Installation
      • Overview
      • Installing Filter Socks Only
      • Installing the SK Plates onto the Clarisea SK5000:
      • Float Switch Bracket Installation (Gen1 & 2 Only)
      • Float Switch Bracket Installation (SK5000 Gen3 Only)
      • Installing the Clarisea SK5000 into the sump
      • Using 1 Clarisea By Itself and/or 1 Filter Sock (or No Socks)
      • Trouble Shooting
      • Things Needed for Setup
    • RM Sump Installation
      • Overview
      • RM34 Sump Setup
        • Filter Socks Only
        • Installing a RedSea ReefMat 500
          • Option 1
          • Option 2
          • Option 3
      • RM44 Sump Setup
        • Single (1) Drain into 1 ReefMat 1200
        • Dual (2) Drains into 1 ReefMat 1200
      • RM60 Sump Setup
        • Single (1) Drain into 1 ReefMat 1200
        • Dual (2) Drains into 1 ReefMat 1200
      • RM72 Sump Setup
        • Installing the RedSea ReefMat 1200 into the sump
          • Single (1) Drain into 1 ReefMat 1200
          • Dual (2) Drains into 1 ReefMat 1200
  • Warranty
    • Warranty
Powered by GitBook
On this page
  1. Installation Manuals
  2. RM Sump Installation
  3. RM34 Sump Setup

Filter Socks Only

Installing Filter Socks only

PreviousRM34 Sump SetupNextInstalling a RedSea ReefMat 500

Last updated 2 years ago

When using the filter socks only, you will need to have purchased the Optional filter sock holders. These can be purchased any time, even after you have your sump. We have installed the bracket in the sump on all RM34s. Figure A.1 Shows the sump with the Filter Socks installed.

Figure A.2 Shows the 2 Filter Sock Brackets installed with the 4 x Thumbscrews. The Thumbscrews are included with the bracket kits.

Figure A.1 RM34 With 2 x 4" filter Socks installed
Figure A.2