Synergy Reef Docs
  • Synergy Reef Docs
    • Who We Are
    • Why Synergy Reef Docs?
  • Installation Manuals
    • The Synergy Reef Shadow Overflow
      • V1, V2 & V3 Overview
      • What's Needed to Install The Shadow® V2 or V3 Overflow
      • Drilling Your Aquarium
        • Drilling Return Holes
      • Attaching the Overflow to the Tank
      • Exterior Rear Box
        • EXTERIOR REAR BOX: Gluing & Initial Planning
          • What Glue Type?
        • Interior Rear Box Plumbing
        • Rear Box Lid
      • Internal Front Box
      • Trouble Shooting Tips
        • Leaks / Gasket Issues
        • Salt Creep
        • Noise
      • Shadow® V1 Installation Manual
      • Basic Tuning Approach
    • SK Sump Installation
      • Overview
      • Installing Filter Socks Only
      • Installing the SK Plates onto the Clarisea SK5000:
      • Float Switch Bracket Installation (Gen1 & 2 Only)
      • Float Switch Bracket Installation (SK5000 Gen3 Only)
      • Installing the Clarisea SK5000 into the sump
      • Using 1 Clarisea By Itself and/or 1 Filter Sock (or No Socks)
      • Trouble Shooting
      • Things Needed for Setup
    • RM Sump Installation
      • Overview
      • RM34 Sump Setup
        • Filter Socks Only
        • Installing a RedSea ReefMat 500
          • Option 1
          • Option 2
          • Option 3
      • RM44 Sump Setup
        • Single (1) Drain into 1 ReefMat 1200
        • Dual (2) Drains into 1 ReefMat 1200
      • RM60 Sump Setup
        • Single (1) Drain into 1 ReefMat 1200
        • Dual (2) Drains into 1 ReefMat 1200
      • RM72 Sump Setup
        • Installing the RedSea ReefMat 1200 into the sump
          • Single (1) Drain into 1 ReefMat 1200
          • Dual (2) Drains into 1 ReefMat 1200
  • Warranty
    • Warranty
Powered by GitBook
On this page
  1. Installation Manuals
  2. RM Sump Installation

RM72 Sump Setup

Installation Instructions for the RM72 (RedSea ReefMat 1200) sump

Thank you for choosing the Synergy Reef RM Series Sump. These instructions will assist you in setting up your new sump. This manual is used for the RM72 reefmat sump.

Please note that this is an Advanced level Do-It-Yourself project and is to be used with or without the RedSea Reefmats. We do not provide setup support or warranty support on the RedSea Reefmat products. You would need to contact RedSea for this support. Due to hundreds of different aquarium setups, pumps, sumps, ect, Synergy Reef DOES NOT Provide system setup or design consultation. We can provide basic installation assistance, but setup and tuning to your aquarium is up to you. If you are not capable of doing this, please hire a professional to do so.

PreviousDual (2) Drains into 1 ReefMat 1200NextInstalling the RedSea ReefMat 1200 into the sump

Last updated 2 years ago