Dual (2) Drains into 1 ReefMat 1200

Dual Drain Hookup

Basic connection of the RM1200 to the sump.

• You can use the corrugated black pipe that is included with the RM1200 and the adapters that Redsea has included. But be aware that you need to use a 1.5" to 1" PVC adapter for this to work as RedSea only include a 1" PVC connection for the stock plumbing.

For higher flow we recommend using 1.5" PVC Pipe plumbed directly into the ReefMat1200 with our included 1.5" to RM adapter.

Pre Installation:

1. Find the included 1.5" to RM adapter that we have included with your sump (It may be white or black).

2. Connect the adapter to the input of the RM1200 as shown in See FIGURE A.1 below.

FIGURE A.1 - RM1200 shown with 1.5" Adapter installed on input.

Build the PVC Manifold (See FIGURE A.2 Below)

Here is a list of the parts needed all PVC is 1.5" Sch40:

• 2 x 1.75" PVC in Length

• 1 x 2" PVC in Length

• 1 x 3.25" PVC in Length

• 1 x 1.5" x 1.5" x 1.5" Sanitary Tee (Found Here at HomeDepot)

• 1.5" DWV 90-degree Street Elbow Fitting (Found Here at HomeDepot)

FIGURE A.2 - PVC Components needed for Dual Drain Connection

Connect the fittings together as seen in Figure A.3 and A.4. You DO NOT need to glue these pieces together.

FIGURE A.3

FIGURE A.4

Once you have the Dual Drain Manifold assembled, you can then attach it to the 2 drain bulkheads located inside the RM44 sump (See FIGURE A.7 below). The 3 drain can be used as an emergency drain.

FIGURE A.5 2 Drain Manifold shown with RM Adapter (RM Adapter should have the RM Nut on it as well)